For hygienic drinking water heating and efficient heat supply. No matter what the heat source – Kermi x-net home stations provide every apartment with hot, clean water and a comfortable room temperatures thanks to panel heating.
x-net home stations by Kermi in multi-family houses ensure hygienic domestic water heating according to the continuous flow principle and efficient heat supply using an integrated underfloor heating manifold and direct heating circuit. The special panel embossing of the heat exchanger makes for 10 % better heat transfer. Thanks to the 30 % less pressure loss in the heat transfer, you can save 5 % pump energy. Thanks to the modular design, the separate components are assembled and installed in real time commensurate with the construction cycle. Fouling or loss of the individual components are minimised as a result.
Kermi tip: separate ordering for each stage of the installation thanks to the modular design
When components are lost, stolen, or fouled, even before they are actually used, it can get expensive. And it costs time. Consequently, we offer practice-oriented ordering commensurate with the progress of the construction work.
Benefits
Dry construction rough installation
The first step is to install the cabinet. Two to twelve heating circuits can be installed, depending on the width of the cabinet. When using the 5-pipe station, up to 8 heating circuits can be installed.
Panel heating installation
The ball valve set and the corresponding distribution sets are not installed until the panel heating is installed.
Final installation
The system with the home station, an optional insulating hood with the x-net ready line / ready line EGO controller, and finally the frame and doors is only installed once the dirty construction work is finished.
Kermi x-net home station for direct heating and hygienically safe hot water generation with a control valve without auxiliary energy in the flow system. Installed on a thermally insulated base plate for flush or surface-mounted installation. Piping made of stainless steel, dezincification-free fittings, all connections are made inside of the station with innovative plug-in connectors. One adapter each is integrated into the station for the heat flowmeter and the cold water input meter. All fittings, screw connections, and components meet the water qualities requirement of AGFW (German Energy Efficiency Association for Heating, Cooling and CHP) data sheet 510 and of VDI 2035. Thanks to the integrated TPC-M differential pressure controller, additional hydraulic balancing of the stations to each other is no longer required.
underfloor heating circuit mixed + heating circuit unmixed
underfloor heating circuit mixed + heating circuit + domestic hot water circulation
Heating circuit unmixed, 2 heat flowmeters + AB PM
heating circuit unmixed
Everything sorted with a single click. The control units x-net ready line and x-net ready line EGO create space for cable feed, save valuable time on the construction site, and because they are already wired to the terminal strip, can be installed with a single click. With x-net ready line EGO, hydraulic balancing is completed in a flash as well. The optical function indicator in the terminal strip as well as open and closed loop control actuators allow a seamless function check resulting in the work being handed over and invoiced early on.
Fully wired flex 8R PU terminal strip 230 V with x-net actuators 230 V for installation on the distribution set of x-net home stations. The actuators are wired in the terminal strip in accordance with VDE requirements, coded so that they cannot be confused, and secured with strain relief. The LED function display of the terminal strip and the function and control display of the control actuators make it possible to quickly and safely check that they are working properly.
Consisting of:
Fully wired flex 8R PU terminal strip 230 V with x-net EGO control actuators 230 V for installation on the distribution set of Kermi x-net home stations. The control actuators are wired in the terminal strip in accordance with VDE requirements, coded so that they cannot be confused, and secured with strain relief. The LED function display of the terminal strip as well as the LED function and control display of the control actuators make it possible to quickly and safely check that they are working properly.
Consisting of: