Clever control for panel heating and cooling. This means the desired heating comfort can be set individually for every room. And clever control also means: saving. x-net control is available in two product lines to suit the particular requirements precisely.
The room control units with or without display in the cable connected or radio version are installed on the wall in the respective room.
The room thermostats and the switch actuator are connected to one another via your home network. The x-net underfloor heating can be controlled at any time via the user mask, a tablet, smartphone, laptop or, PC – whether from work, while driving back from holiday, or on the sofa.
Switch actuator (top picture) and actuators (lower picture): future-proof through option to upgrade via micro-SD card. Multi-day-solutions via wireless or bus cable, ideal for a building with central management.
Installation position: The switch actuator and actuators are installed in the x-net underfloor heating/cooling distribution cabinet.
The components are perfectly coordinated and ensure fast and reliable installation as well as reliable operation.
With the standard x-net controller, the panel heating/cooling can be controlled quite easily according to demand for each individual room. The room controllers are available with or without a display as you like, also as a flush-mounted version. Wired with electrical installation cable 5 x 1.5 mm².
Everything sorted with a single click. The control units x-net ready line plus and x-net ready line EGO plus create space for cable feed, save valuable time, and because they are already wired to the terminal strip, can be installed with a single click. With x-net ready line EGO plus, hydraulic balancing is completed in a flash as well. Normally closed and with a folding lever to unscrew to release or respectively open the thermostatic valve manually without current. With an integrated flow temperature limiter. A room temperature controller of the x-net standard control system is required for the control actuator to work.
Fully wired Kermi flex plus terminal strip with Kermi x-net actuators 230 V and Kermi x-net quick fix set for quick installation in the x-net distribution cabinets. The actuators are wired in the terminal strip in accordance with VDE requirements, coded so that they cannot be confused, and secured with strain relief. The LED function display of the terminal strip as well as the function and control display of the actuators make it possible to quickly and safely check that they are working properly.
Fully wired Kermi flex plus terminal strip with Kermi x-net EGO control actuators 230 V and Kermi x-net quick fix set for quick installation in the x-net distribution cabinets. The control actuators are wired in the terminal strip in accordance with VDE requirements, coded so that they cannot be confused, and secured with strain relief. The LED function display of the terminal strip as well as the LED function and control display of the control actuators make it possible to quickly and safely check that they are working properly.
The Kermi x-net comfort controller for heating/cooling provides the highest level of operating comfort and control quality with energy savings of up to 20 %. Quite simply using the room thermostat on the wall at home or via the Internet while out and about using a tablet or smartphone. The x-net comfort control is future-proof by being completely equipped for heating and/or cooling systems, both in the wireless and cable-connected version (protected against polarity reversal 2-wire bus).
Flush-mounted room temperature regulator with LCD display with floor temperature sensor and protective conduit for floor sensor with metallic end cap.