Electrical solutions
For designer radiators & bathroom radiators
Operating electric radiators
Exceptionally easy and convenient.
Our electric radiators embody simplicity right from the planning and installation stage – and we think that operating them should too.
That’s why we offer a range of electric sets to suit every requirement, providing you with a simple and convenient way of operating your radiators – whether you’ve chosen electric operation or additional electric operation.
WRX electric set
The WRX variant comprises a wall outlet (protection type IPX4) including a radio receiver, an electrically regulated heating rod (not provided with infrared radiators), and a radio controller. The radio controller is equipped with a touch display which can be used to program and control various functions. The controller can be surface-mounted anywhere in the room as it is battery-operated. The wall outlet is mounted on a flush-mounted box.
- Room temperature control for heating and low setting levels at programmed time intervals
- Programmable time interval: 15 minutes
- 2 preset, 1 freely programmable weekly programme (room temperature) - Presence/absence mode
- Open window detection
- Controller available in White/White, Black/Black, or White/Black (housing/display), wall outlet always in White
WFS electric set
The WFS variant comprises a wall outlet (protection type IPX4) including a radio receiver, an electronically regulated heating rod, and a radio controller. As the controller is battery-powered, it can be surface-mounted anywhere in the room. The wall outlet is mounted on a flush-mounted box; the length of the heating rod cable is approximately 1.2 m. The wall outlet and controller are available in White and Titanium.
- Continuously variable temperature control
- Boost mode (full capacity for 60 minutes)
- Antifreeze protection
- Function display (Heat, Off, Booster)
- Option of switching from room temperature control to towel warming function only
- Available in White and Titanium
WKS electric set
The WKS variant comprises a wall outlet (protection type IPX4), an electronically regulated heating rod, and the standard controller. The standard controller is installed on a flush-mounted box. Power is supplied from a flush-mounted box provided for the controller. The connection between the controller and the wall outlet requires cabling provided on site. The wall outlet is mounted on a flush-mounted box. The length of the heating rod cable is approximately 1.2 m. The wall outlet and the controller are available in White and Titanium.
- Continuously variable temperature control
- Boost mode (full capacity for 60 minutes)
- Antifreeze protection
- Function display (Heat, Off, Booster)
- Option of switching from room temperature control to towel warming function only
- Available in White and Titanium
FKS electric set
The FKS variant comprises an electronically regulated heating rod including a controller (protection type IPX4) that is installed on the radiator. The length of the heating rod cable is approximately 1.2 m. The controller is available in White and Chrome Silver.
- Continuously variable temperature control
- Boost mode (full capacity for 60 minutes)
- Antifreeze protection
- Function display (Heat, Off, Booster)
- During commissioning, it is possible to switch from room temperature control to a towel warming function only
- Available in White and Chrome Silver
