Kermi x-net C12 tacker system

x-net C12 tacker system The classic among underfloor heating systems - great durability and efficiency.

Underfloor heating for wet screed. Energy saving, efficient low temperature technology providing cosy thermal comfort throughout the year, as well as great flexibility and installation freedom make the x-net tacker system an ideal solution for surface temperature control for residential and commercial areas. Best floating screed properties and innovative in-house developments such as the special x-net Tacker technology ensure particularly fast and efficient installation and absolutely safe pipe fixation.

Kermi x-net C12 tacker system

System benefits

  • Heating and cooling
  • Unbeatably fast insulation laying
  • Easy processing of remaining pieces of insulation
  • Best-suited for floating screeds
  • Absolute unlimited options when laying the pipes

Kermi-Plus benefits

  • Large-sized tacker folding plates/rolls for laying insulation quickly
  • The right tacker insulation for every application:
    1. Impact sound insulation for apartment separation floors
    2. Rigid foam insulation for high payloads
  • Highly tear-resistant anchor woven foil for high impact strength and huge retention force of the x-net pipe anchor
  • Pipe anchoring near the surface with specially constructed x-net pipe anchors
  • Two pipe dimensions - one pipe anchor:
    1. x-net 5-layer pipe 14 x 2
    2. x-net 5-layer pipe 16 x 2
  • x-net tacker tool and x-net pipe anchor for quick pipe anchoring without any problems
  • Heating technology tested according to DIN EN 1264 and DIN Certco-certified

Benefits

Tacker insulation

x-net C12 tacker folding plate with a manageable 2 m² per plate. Perfect for small rooms.
Kermi x-net C12: installation of tacker roll
x-net C12 tacker roll in different insulation thicknesses with a coverage area up to 15 m². For use in large to medium-sized rooms.
Kermi x-net C12: fitting pieces easy to cut
Simple cutting of fitted pieces, and minimal waste as leftover pieces are also used. Screed-separating panel connections can be made using leftover pieces, without overlap and using x-net adhesive tape.
Kermi x-net C12: 3cm wide overlapping projection of the anchor woven foil
When using cement screed, it is sufficient to use the 3 cm wide overlap of the anchor woven foil - no gluing required.
Kermi x-net C12: anchor woven foil laminated to insulation
The anchor woven foil covering the entire surface of the insulation is made up of highly tear-resistant band fabric with PE overlay, including printed 5.5 cm installation grid.
Kermi x-net C12: pipe anchor with high holding force and rounded outer contour
The x-net C12 pipe anchor is impressive with its high retention strength and rounded external contour for effectively deflecting external forces. Six flexible barbs per pipe anchor expand under the film and form a large support surface. This reliably prevents the pipe anchor from being pulled out. The optimal interlocking of the pipe anchors under the film ensures that pipes are held securely close to the surface.

x-net 5-layer-PE-Xc pipe

Kermi x-net C12: pipe inscription indicates remaining length and pipe length already used
Printed marks on the pipe indicate the remaining length and pipe length already used, allowing optimal utilisation of pipe coils.
Kermi x-net C12: high degree of flexibility when bending pipes
High flexibility allows tight bending radii and reduces the restoring forces in pipe elbows.
Kermi x-net pipe and pipe connection
Pipes and pipe connectors as defined in DIN 4726 and DIN EN ISO 15875 are tested and monitored regularly by an accredited independent testing institute.

Detail solutions - expansion joint profile 10/100

Kermi x-net C12: pipe passage cutout with x-net notching pliers
Pipe passages cut out with x-net notching pliers. Simple cut-out positioning thanks to printed grid markings in the grid dimension of the x-net C12 tacker insulation.
Kermi x-net C12: wide adhesive foot and lateral plastic reinforcement
Wider adhesive foot and lateral plastic reinforcement for vertical stability and straight-line positioning.
Kermi x-net C12: intersecting pipes are wrapped with the x-net adhesive pipe protection strips
To allow the necessary freedom of movement, crossed pipes are wrapped with x-net adhesive pipe protection strips.

Detail solutions - x-net tacker tool

Kermi x-net C12: slender, rounded supporting foot of the x-net tacker tool
The narrow, rounded supporting foot of the x-net tacker tool enables easy and secure setting of the pipe anchor on the tacker insulation.
Kermi x-net C12: transparent inspection flap on the eject shaft
The transparent inspection flap on the discharge shaft can be easily opened by hand.
Kermi x-net C12: 6 barbs of the pipe anchor ensure optimum hold close to the surface
The six barbs of the pipe anchor ensure optimal pipe retention near the surface on the tacker insulation. There are therefore only a few millimetres of room for movement, even under tensile load.

Detail solutions - x-net edge insulating strips H 160 mm

Kermi x-net C11: adhesive strips for fixing the x-net edge insulation strip (H 160 mm) to the wall
Adhesive strip for wall-fixing of x-net edge insulation strip H 160 mm. Height adjusted to the floor structure so that there is no adhesive residue visible in the wall area afterwards.
Kermi x-net C12: protective film of the x-net edge insulation strip H 160
The protective film on x-net edge insulating strip H 160 provides optimal sealing on the level tacker insulation.
Kermi x-net C11: multiple tear-off perforations
Multiple tear-off slits for fast tool-free cutting of the edge insulation strip without leaving marks on the wall plaster.

x-net controls

Heating comfort at the press of a button.

Clever control for panel heating and cooling. This means the desired heating comfort can be set individually for every room. Clever control also means: save cleverly. x-net control is available in two product lines, to precisely suit the respective requirements.

x-net connect

Kermi does away with uncontrolled heat dissipation - with the new x-connect system, heat is selectively guided past the screed by the underfloor heating manifold, allowing efficient and controlled heating operation. This allows significant heat losses to be avoided in this area.

x-link connection fitting

The combination of a bathroom radiator and underfloor heating is becoming increasingly popular. What was missing was a visually and technically convincing solution for the connection problem.

Using the x-link connection fitting, it is quick and easy to connect the underfloor heating circuit via the bathroom radiator to the existing radiator network.

Smart Home with x-center base

Heating control at home. Easy while out and about.

Simple and easy control of your floor heating/-cooling on your tablet.

Controlling the heat in your own home when you want and where you want - Kermi Smart Home makes it possible. The intelligent system for digital, location-independent control of the "Kermi system x-optimised" conveniently conducts all the components of the heating system via smartphone and tablet. Other devices such as home lighting or shutters can be incorporated into the system.

Using x-center base, the headquarters of Kermi Smart Home and with your comfort control, you can easily control your x-net underfloor heating/cooling while at home or while out and about and control the room temperature. For intelligent living and maximum comfort for a sense of well-being.

Find out more

x-net C12 product film

The classic among underfloor heating systems - great durability and efficiency

- Large format tacker folding panels / rolls to lay insulation quickly
- Rigid foam insulation version and with impact sound insulation
- Highly tear-resistant anchor woven foil for high impact strength and huge retention force of the x-net pipe anchor
- Pipe anchoring near the surface with specially constructed x-net pipe anchors
- Two pipe dimensions -- one pipe anchor

 

Kermi: Clear advantages. Complete service.

Comprehensive Kermi system x-optimised

  • Energy savings up to 34 %
  • Optimally matched components
  • Everything from a single source, from planning to commissioning
This means "Kermi system x-optimised" 12 good reasons for Kermi system x-optimised Download technology manual
Kermi - Zertifizierte Qualität

Certified quality

  • Kermi is certified according to DIN EN ISO 9001;2008, 14001:2004 and 50001:2011
  • Components comply with current standards and directives
  • Regular monitoring of core components by independent testing institutes
Kermi download technical data sets

Support with order process and planning

  • Support with order preparation
  • Support with a wide range of services during system planning
  • Dimensioning data set for liNear software
  • Comprehensive software for dimensioning rooms
  • Comprehensive information material
  • Extensive technical Internet portal
Kermi x-net C11: with outstanding customer service

Complete customer service

  • Nationwide service team as well as field service teams for fast on-site assistance
  • Competent in-house service team for fast telephone assistance
  • Professional, unbureaucratic processing of complaints
  • Detailed initial training on-site
  • Detailed planning and design consultation
Kermi system knowledge down to the last detail

System knowledge in great detail

  • Carefully engineered system technology developed in-house for easier, fast, safe work
  • Many Kermi innovations
  • Kermi special solutions for practical application by tradespeople

Documents

Documents for you to download:

Links for specialist partners

Image data

Kermi image data for specialist partners
not available

Colors, certificates etc.

Kermi further information for specialist partners

IT solutions

Kermi EDP solutions for specialist partners
not available