Kermi x-net C11 knob system

x-net C11 knob system The classic among underfloor heating systems - rational in every direction.

Underfloor heating for wet screed. Pleasant climate for every season and highest energy efficiency. x-net C11 is the optimised floor heating system by virtue of innovative in-house developments and carefully engineered detailed solutions for heating and cooling based on proven knob plate technology. Perfectly matched system components and a sophisticated assembly system for clean and safe installation in residential and commercial buildings.

Kermi x-net C11 knob system

System benefits

  • Heating and cooling
  • Optimal for one-man pipe laying
  • Best suited for floating screed
  • Perfect protection for the pipe during the shell construction phase due to the knob structure
  • Installation distances for system reasons which comply with standards

Kermi-Plus benefits

  • Two pipe dimensions can be processed:
    1. x-net 5-layer pipe 14 x 2
    2. x-net 5-layer pipe 16 x 2
  • Diagonal installation of the pipe in the panel without additional pipe fasteners
  • High impact resistance
  • High pipe retention force
  • A suitable system panel for every application: 1. Impact sound insulation for apartment separation floors 2. Rigid foam insulation for high payloads
  • Large-sized panels for fast insulation installation
  • Heating technology tested according to DIN EN 1264 and DIN Certco-certified

Benefits

Knob palette

Kermi x-net C11: straight pipe run parallel to the plate edges or diagonally
Straight line pipe layout parallel to the plate edges or diagonal without additional pipe fasteners.
Kermi x-net C11: sealing of plate joints through use of laterally overlapping thermoforming film
Simple plate joints with thermoforming film overlapping at the side to ensure screed-separating protective cover as defined in DIN 18560.
Kermi x-net C11: linking of butt-jointed plates
Butt-joint plates connected by x-net C11 connecting strip as accessory, e.g. for re-using leftover pieces.
Kermi x-net C11: fast installation due to large-format panels
Large plates for fast installation, ideal for pipe laying by a single person.
Kermi x-net C11: pipe remains well-protected by the knob structure during the entire preliminary phase of construction
Pipe remains well-protected by the knob structure during the entire shell construction phase.
Kermi x-net C11: use of var. pipe dimensions, 14 x 2 left, 16 x 2 right
The special knob undercut on the sturdy thermoforming film allows the use of different pipe dimensions (picture left: 14 x 2; picture right: 16 x 2)  and ensures optimal retention in the knob plate.

x-net 5-layer-PE-Xc pipe

Kermi x-net C11: pipe inscription indicates remaining length and pipe length already used
Printed marks on the pipe indicate the remaining length and pipe length already used, allowing optimal utilisation of pipe coils.
High flexibility allows tight bending radii and reduces the restoring forces in pipe elbows.
Kermi x-net pipe and pipe connection
Pipes and pipe connectors as defined in DIN 4726 and DIN EN ISO 15875 are tested and monitored regularly by an accredited independent testing institute.

x-net detail solutions - expansion joint profile 10/100

Kermi x-net C11: sealing of the expansion joint at the base of the knob by the x-net knob sealing profile.
The expansion joint at the knob base is sealed by the x-net knob sealing profile. This allows freedom of movement over the entire screed cross-section.
Kermi x-net C11: pipe passage cutout with x-net notching pliers
Pipe passages cut out with x-net notching pliers. Cut-out positioning is simplified by printed grid markings at the grid dimensions of the x-net C11 knob plate.
Kermi x-net C11: wide adhesive foot and lateral plastic reinforcement
Wider adhesive foot and lateral plastic reinforcement for vertical stability and straight-line positioning. The x-net adhesive pipe protection strip is used for protecting crossed pipes.

Detailed solutions - x-net C11 combination set

Kermi x-net C11: dimension of flat insulation panel
Dimensions of the flat insulation panel are adapted to the knob plate grids. To make it easy to cut between the knobs.
Kermi x-net C11: screed-tight transition thanks to x-net C11 overlapping strips
The x-net C11 overlap strip ensures a screed-separating transition.
Kermi x-net C11: combi set for the simple production of doorways
The x-net C11 combi set for easy creation of doorways allows different knob alignment in each room.

Detail solutions - x-net edge insulating strips H 160 mm

Kermi x-net C11: adhesive strips for fixing the x-net edge insulation strip (H 160 mm) to the wall
Adhesive strip for wall-fixing of x-net edge insulation strip H 160 mm. Height adjusted to the floor structure so that there is no adhesive residue visible in the wall area afterwards.
Kermi x-net C11: tight fixing on the knob plate
Sealed fixing of the protective film using the x-net sealing profile on the knob plate.
Kermi x-net C11: multiple tear-off perforations
Multiple tear-off slits for fast tool-free cutting of the edge insulation strip without leaving marks on the wall plaster.

x-net unwinding unit

For tension- and twist-free unrolling of the x-net pipe system from the packaging.

Kermi x-net C11: unrolling unit developed in-house
Solid components, manufactured with high precision and designed for longevity – inherent in every Kermi-designed product.
Kermi x-net C11: can be assembled without tools, straightforward transportation of x-net unrolling unit
Can be assembled and disassembled in a very short time, in a few simple steps without tools. The x-net pipe unwinder can even be carried in a backpack.
Kermi x-net C11: transportable at any time
Any remaining pipe stays in the packaging, protected against dirt and damage and ready to be transported at any time.

x-net controls

Heating comfort at the press of a button.

Clever control for panel heating and cooling. This means the desired heating comfort can be set individually for every room. Clever control also means: save cleverly. x-net control is available in two product lines, to precisely suit the respective requirements.

x-net connect

Kermi does away with uncontrolled heat dissipation - with the new x-connect system, heat is selectively guided past the screed by the underfloor heating manifold, allowing efficient and controlled heating operation. This allows significant heat losses to be avoided in this area.

x-link connection fitting

The combination of a bathroom radiator and underfloor heating is becoming increasingly popular. What was missing was a visually and technically convincing solution for the connection problem.

Using the x-link connection fitting, it is quick and easy to connect the underfloor heating circuit via the bathroom radiator to the existing radiator network.

Smart Home with x-center base

Heating control at home. Easy while out and about.

Simple and easy control of your floor heating/-cooling on your tablet.

Controlling the heat in your own home when you want and where you want - Kermi Smart Home makes it possible. The intelligent system for digital, location-independent control of the "Kermi system x-optimised" conveniently conducts all the components of the heating system via smartphone and tablet. Other devices such as home lighting or shutters can be incorporated into the system.

Using x-center base, the headquarters of Kermi Smart Home and with your comfort control, you can easily control your x-net underfloor heating/cooling while at home or while out and about and control the room temperature. For intelligent living and maximum comfort for a sense of well-being.

Find out more

x-net C11 product film

 

The classic among underfloor heating systems - rational in every direction

- Two pipe dimensions can be laid
- Diagonal installation of the pipe in the panel without additional pipe fasteners
- High impact resistance
- High pipe retention force
- Rigid foam insulation version and with impact sound insulation

Kermi: Clear advantages. Complete service.

Comprehensive Kermi system x-optimised

  • Energy savings up to 34 %
  • Optimally matched components
  • Everything from a single source, from planning to commissioning
This means "Kermi system x-optimised" 12 good reasons for Kermi system x-optimised Download technology manual
Kermi - Zertifizierte Qualität

Certified quality

  • Kermi is certified according to DIN EN ISO 9001;2008, 14001:2004 and 50001:2011
  • Components comply with current standards and directives
  • Regular monitoring of core components by independent testing institutes
Kermi download technical data sets

Support with order process and planning

  • Support with order preparation
  • Support with a wide range of services during system planning
  • Dimensioning data set for liNear software
  • Comprehensive software for dimensioning rooms
  • Comprehensive information material
  • Extensive technical Internet portal
Kermi x-net C11: with outstanding customer service

Complete customer service

  • Nationwide service team as well as field service teams for fast on-site assistance
  • Competent in-house service team for fast telephone assistance
  • Professional, unbureaucratic processing of complaints
  • Detailed initial training on-site
  • Detailed planning and design consultation
Kermi system knowledge down to the last detail

System knowledge in great detail

  • Carefully engineered system technology developed in-house for easier, fast, safe work
  • Many Kermi innovations
  • Kermi special solutions for practical application by tradespeople

Documents

Documents for you to download:

Links for specialist partners

Image data

Kermi image data for specialist partners
not available

Colors, certificates etc.

Kermi further information for specialist partners

IT solutions

Kermi EDP solutions for specialist partners
not available