Kermi WKS electrical set at all-electric radiator

Electrical operation of Kermi design and bathroom radiators

Perfectly equipped to meet every requirement and situation.

Design and bathroom radiators from Kermi are factory-equipped for all popular heat sources, whether oil or gas. If you want to be completely independent of the hot water central heating, choose one of the Kermi models for electric operation. Delivered complete with electronically controlled heating rod, heat transfer fluid and controller. Simply connect to the power supply and feel its benefits. A cost and time-saving solution, particularly in old buildings.

With the new electrical solutions from Kermi, with additional electric operation you can for example also enjoy perfect heating comfort between the seasons and always when your normal central heating is not enough. And incidentally, you will also always have beautifully warm towels.

If you decide to go for electric operation of design and bathroom radiators, you are deciding in favour of the most advanced technology and ultimate operating convenience.

 

 

Additional electric operation.

As an option for pleasant warmth between the seasons and for towels that are always nicely dry and comfortably warm.

Kermi Design- und Badheizkörper Basic-50 gerade im Elekro-Zusatzbetrieb mit Elektro-Set WKS

All-electric operation.

Completely independent of a central heating network. A cost and time-saving solution primarily for old buildings.

Kermi Design- und Badheizkörper Basic-E gerade für reinen Elektrobetrieb mit Elektro-Set WKS

Product overview: Electric solutions for design and bathroom radiators

There are four different solutions available to choose from, depending on your tastes and requirements:

Electrical set FKS

The controller is installed directly on the radiator and is fitted with a connector to connect it directly to a wall socket.

  • Infinitely variable temperature regulation
  • Boost mode (full capacity for 60 minutes)
  • Antifreeze protection
  • Function display (heating, off, booster)
  • Switching is possible from room temperature control to pure towel drying function during commissioning
  • available in white and in chrome-silver

Instructions for installation and use FKS

 

 

Electrical set WFS 

The wireless standard controller can be freely positioned in the room surface-mounted as it is battery-operated.

  • Infinitely variable temperature regulation
  • Boost mode (full capacity for 60 minutes)
  • Antifreeze protection
  • Function display (heating, off, booster)
  • Switching is possible from room temperature control to pure towel drying function
  • available in white and titanium

Instructions for installation and use WFS

Kermi Elektro-Set WFS - Wand Funk Standard (weiß)

Electrical set WKS

The Standard controller is installed on a flush-mounted box. Flush-mounted, a direct wiring connection between heating rod and control unit must be made.

  • Infinitely variable temperature regulation
  • Boost mode (full capacity for 60 minutes)
  • Antifreeze protection
  • Function display (heating, off, booster)
  • Switching is possible from room temperature control to pure towel drying function
  • available in white and titanium

Instructions for installation and use WKS

Kermi Elektro-Set WFS - Wand Funk Standard (weiß)

Electrical set WFC

The wireless Comfort controller can be freely positioned in the room surface-mounted as it is battery-operated. The wireless controller has a control dial which can be used to programme and control various functions.

  • Room temperatures control to heating and reduced operation level at programmed time intervals Programmable time interval: 15 minutes 2 preset, 1 freely programmable weekly programme (room temperature)
  • Room temperature independent towel warming function which can be set for each day for programmed time intervals Programmable time interval: 15 minutes 1 preset, 1 freely programmable
  • Boost operation (adjustable 30 - 120 minutes)
  • Antifreeze protection
  • Function display (room temperature, weekday, time)
  • "Presence" mode
  • "Absence" mode
  • available in white and titanium

Instructions for installation and use WFC

Kermi WFC electrical set - Wand Funk Comfort (white)

Suitable models for electric operation

Our top priority is protecting your personal data. To provide top level functionality, continuous optimization of the website, and advertising selected to suit your interests, this page used different cookies: technical cookies, tracking cookies, and marketing cookies. We recommend agreeing to the use of these cookies by simply clicking “Agree”. You can find out more about the cookies used and can adjust your settings by clicking on the “Settings” button.
Do you agree to the use of these cookies and associated processing of your personal data?
Agree Setup Privacy Policy