x-net® home station
For hygienic domestic water heating and efficient heat supply.
No matter what the heat source – Kermi x-net home stations provide every apartment with hot, clean water and comfortable room temperatures via panel heating.
The home stations can be operated with all heat sources. Ideal for quick, uncomplicated installation: Specially developed innovative plug connections eliminate the annoyance of having to retighten internal screw connections. The new and innovative plug connection technology in combination with the high degree of pre-assembly of the whole station – including the underfloor heating manifold – significantly reduce installation times. The special panel embossing of the heat exchanger makes for highly efficient heat transfer. In addition to that, the pressure loss in the heat exchanger is around 30 % lower, saving an additional 5 % of pump energy. Thanks to the modular design, the separate components are promptly assembled and installed as the building project progresses. Soiling or loss of the individual components are minimised as a result. Perfectly matched components also reduce installation costs and avoid unnecessary energy losses.
Modular design
x-net home stations
When components are lost, stolen, or fouled, even before they are actually used, it can get expensive. And it costs time. That is why we offer a practical ordering system that allows you to place orders step by step as the construction work progresses.
- This reduces the risk of theft, damage, or soiling on the construction site
- Eliminates the need to temporarily store components that are not yet required
- No pre-financing for components that can only be installed later on
Kermi tip :you can place separate orders for each installation stage thanks to the modular design
x-net home station
For hygienic domestic water heating and efficient heat supply.
Kermi x-net home station for direct heating and hygienically safe hot water generation with a control valve and without the need for auxiliary energy in the flow system. Installed on a thermally insulated base plate for flush or surface mounting. Piping made of stainless steel, dezincification-free fittings, all connections inside the station established using innovative plug-in connectors. The station has two integrated adapters: one for the heat flowmeter and one for the cold water input meter. All fittings, screw connections, and components meet the water quality requirements of AGFW data sheet 510 (published by the German Energy Efficiency Association for Heating, Cooling and CHP) and of standard VDI 2035.
Thanks to the integrated TPC-M differential pressure controller, there is no longer any need for additional hydraulic balancing of the stations in relation to one another.
- Stainless steel heat exchanger, Soldered Copper or Stainless Steel
- Hot water power output: 37 kW, 45 kW, and 55 kW
- Integrated underfloor heating manifold for 2-12 heating circuits
- Versions for 3 and 5-pipe systems
- Integrated differential pressure controller for the hydraulic balancing of the stations in relation to one another
- Special plug connection – no need to retighten internal screw connections
- No legionella tests required
- Perfectly coordinated modular design for trouble-free installation
- The spacious manifold cabinet has plenty of room for connecting the panel heating pipes and control components, making it possible to work quickly and comfortably
- Can be extended with the optional circulation set and high-temperature connection
- Weight optimised for easy installation
- Optional thermal insulation in the form of a three-part insulating hood
- Heat dissipation reduced to approx. 150 kWh/a
Versions
x-net home station, mixed heating circuit
Mixed underfloor heating circuit + unmixed heating circuit
- Version: Copper or Stainless Steel
- Insulating hood: optional
- Power output: 37 kW, 45 kW, or 55 kW (copper)
Power output: 37 kW, 45 kW, or 51 kW (Stainless Steel)
x-net home station circulation
Mixed underfloor heating circuit + heating circuit + domestic hot water circulation
- Version: Copper or Stainless Steel
- Insulating hood: optional
- Power output: 37 kW, 45 kW, or 55 kW (copper)
Power output: 37 kW, 45 kW, or 51 kW (Stainless Steel)
x-net home station C 55, 5-pipe version
Unmixed heating circuit, 2 heat flowmeters + AB PM
- Version: Copper or Stainless Steel
- Insulating hood: optional
- Power output: 55 kW (copper)
Power output: 51 kW (Stainless Steel)
x-net home station, static heating circuit
Unmixed heating circuit
- Version: Copper or Stainless Steel
- Insulation: optional
- Power output: 37 kW, 45 kW, or 55 kW (copper)
Power output: 37 kW, 45 kW, or 51 kW (Stainless Steel)
x-net home station pro, mixed heating circuit
Mixed underfloor heating circuit
- Version: Copper or Stainless Steel
- Insulating hood: incl. three-part EPP insulating hood
- Power output: 37 kW, 45 kW, 55 kW, or 75 kW
x-net home station pro, 5-pipe version
Unmixed heating circuit
- Version: Copper or Stainless Steel
- Insulating hood: incl. three-part EPP insulating hood
- Power output: 55 kW or 75 kW
x-net home station pro, static heating circuit
Unmixed heating circuit
- Version: Copper or Stainless Steel
- Insulating hood: incl. three-part EPP insulating hood
- Power output: 37 kW, 45 kW, 55 kW, or 75 kW
x-net home station control
Everything sorted with a single click. The x-net ready line and x-net ready line EGO control units create space for cable entry, save valuable time on the construction site, and – because they are already wired to the terminal strip – can be installed with a single click. With x-net ready line EGO, hydraulic balancing is completed in a flash as well. The optical function indicators in the terminal strips, actuators, and variable speed drives mean that function checks can be carried out seamlessly, allowing the work to be handed over and invoiced early on.
x-net ready line
Fully wired 230 V flex 8R PU terminal strip with 230 V x-net actuators for installation on the manifold set of x-net home stations. The actuators are wired in the terminal strip in accordance with VDE requirements, coded to prevent mix-ups, and secured with strain relief. The LED function indicator on the terminal strip and the function and control indicators on the actuators allow you to check – quickly and safely – whether they are working properly.
Consisting of:
- Kermi 230 V flex 8R PU terminal strip
- Kermi 230 V x-net actuators
x-net ready line EGO
Fully wired 230 V flex 8R PU terminal strip with 230 V x-net EGO variable speed drives for installation on the manifold set of Kermi x-net home stations. The variable speed drives are wired in the terminal strip in accordance with VDE requirements, coded to prevent mix-ups, and secured with strain relief. The LED function indicator on the terminal strip and the LED function and control indicators on the variable speed drives allow you to check – quickly and safely – whether they are working properly.
Consisting of:
- Kermi 230 V flex 8R PU terminal strip
- Kermi 230 V x-net EGO variable speed drives
x-net home station EMX
For simple and sustainable replacement of gas-fired single-storey heating systems
The Kermi x-net home station EMX ensures direct heating and hygienically safe hot water generation with a control valve and without the need for auxiliary energy in the flow system. Installed on a double base plate for surface mounting on the wall.
- For efficient distribution of thermal heat and hygienic domestic water heating
- For a free choice of heat source
- Hot water power output: 37 kW, 45 kW, and 55 kW
- Integrated differential pressure controller for the hydraulic balancing of multiple stations
- Adapter suitable for heat flowmeters
- No legionella tests required
- Thermally insulated pipelines
- Highly efficient heat exchanger enables 10 % better transfer
- Summer bypass integrated
- Primary heating connection can be established from the bottom and top using the optional piping set
Documents
x-net home station installation video
The x-net home station ensures hygienic domestic water heating based on the continuous flow principle along with efficient heat supply thanks to an integrated underfloor heating manifold and direct heating circuit.
The new and innovative plug connection technology in combination with the high degree of pre-assembly of the whole station – including the underfloor heating manifold – reduce installation times by up to 15 minutes. Thanks to the modular design, the separate components are promptly assembled and installed as the building project progresses. Soiling or loss of the individual components are minimised as a result. Perfectly matched components also reduce installation costs and avoid unnecessary energy losses.
Customer service
x-net panel heating and surface cooling
Quotation and planning service for x-net panel heating and surface cooling
Are you looking for a Kermi specialist partner near you?
With our search, you can find a specialist partner near you that can assist you with consultation plus exhibition, with planning or with consultation and installation.